-
Single girder hoist crane
The girder (the main body) is manufactured with one single unit, so it can traverse sing the I-beam while hanging onto it. This is mainly applicable for the work objects weighing 3 tons or lighter and for the span measuring 15m or shorter. Compared with the double girder hoist crane, this product costs less. However, there are some weak points in terms of repairing or managing it when troubles occur. It needs to be installed for a place with a shorter span
-
Double girder hoist crane
The girder (the main body) is manufactured with two units. The hoist itself is manufactured as a double type, and is mounted onto the upper part of the girders, so it is stable and solid and applicable for high tonnage work. if the tonnage is 5 tons or heavier and the span is longer than 20m, the hoist crane should be manufactured as the double girder type. As a walk way and a hand rail are installed, it makes ing it easy to maintain and manage the system. With such diverse advantageous points, the products have been installed widely. In addition, when there is a need to mount a molding at injection factories or press factories, the work can be carried out safely and smoothly if a creep type hoist is selected.
-
Suspension hoist crane
This crane can be installed using a ceiling steel trust or the ceiling slab of a building, if it is difficult, due to the site's structural condition, to install posts to erect a travelling beam. This is normally manufactured and installed when a low capacity hoist crane is needed
-
Single girder Gantry hoist crane
The gantry crane is mainly installed at open area depending on the work conditions of a site. Characteristically, it is not restricted in its capacity, height and width. It can help transport and load various materials. It is mainly manufactured in large size. It is advantageous as it can utilize a wide space.
-
Double girder Gantry hoist crane
The gantry crane is mainly installed at open area depending on the work conditions of a site. Characteristically, it is not restricted in its capacity, height and width. It can help transport and load various materials. It is mainly manufactured in large size. It is advantageous as it can utilize a wide space.
-
Single girder Semi Gantry hoist crane
One rail is installed using a column of a building and the other rail is installed utilizing the floor to allow the crane to travel. At the top of the factory, a overhead crane is installed and operated, and, a smaller crane is installed beneath it, necessary due to the work conditions. It can be also installed utilizing building such as a side space such as that of a factory.
-
Double girder Semi Gantry hoist crane
One rail is installed using a column of a building and the other rail is installed utilizing the floor to allow the crane to travel. At the top of the factory, a overhead crane is installed and operated, and, a smaller crane is installed beneath it, necessary due to the work conditions. It can be also installed utilizing building such as a side space such as that of a factory.
-
Crab hoist crane
The girder (the main body) is manufactured as a double type. It is to be installed mainly on the gantry crane and the overhead crane. As the crab is mounted on the upper part of the girder, it is stable and solid. it is used for transporting and loading large quantities of objects. A remote controller and an operation room are arranged, making it easy to operate the system. The travelling speed can be adjusted in the directions of east, west, south and north as well as upwards and downwards, and left and right. The travelling speed ranges from 20m to 100m per minute. The crane can shifts in its speed in four stages. With a wider space and a higher speed, the work efficiency can be maximized. It costs a lot, which is a disadvantageous point. However, the system will be more beneficial when taking into consideration of the work efficiency.
-
Mono Rail hoist crane
It is used to transport and load heavy objects along a certain line. As the I-beam is installed for the crane to travel, it can be used mainly for transporting small objects. It is disadvantageous as it can not transport and load objects in the directions of east, west, south and north.
-
Jib hoist crane
Used frequently in many works to transport small loads assisting large capacity cranes including ceiling cranes. Used in low capacity within a small workspace. Installed on walls, pillars and ground surfaces. Low installation cost because of its relatively simple structure.